Tag Archives: aysi

Emboss Resist with a Twist

What happens when something goes wrong on your card or scrapbook design? Do you start over or see if you can fix it?

My memory of an old technique saved the day and enabled me to fix a problem with gunk getting embedded in my heat-embossed image. And I love it!

It all began with this colour challenge from the As You See It Challenge blog:

I was a little worried with the intensity of these colours, but by using the coloured ink instead of coloured cardstock, I was able to keep my design from getting too loud.

I wanted to get a jump on my holiday cards, so I went with a Christmas design using the Carols of Christmas stamp set and the Card Front Builder Thinlits.

I call this technique, “Emboss Resist with a Twist” or “Emboss Resist and Wipe”. The second name definitely gives you a better understanding of what this technique involves.

The regular emboss resist technique, as you may know, is when you heat emboss an image, usually with clear embossing powder, then sponge or paint with a water-based ink over the image. The embossed area resists the ink and often it is advised to use a paper towel to polish any ink residue off of the embossed image to make it really pop. With the “Emboss Resist with a Twist” technique, you take it another step: Heat the clear embossed image and, while the embossing powder is still warm and soft from being reheated, wipe it with a paper towel to remove it from the surface of your paper!

Wait, WHAT!?

Why would you want to remove it, you ask? Once it’s removed and all the shine has been wiped clean from your cardstock, the image remaining will be more crisp, more white, and will have a beautiful matte finish.

Another reason to remove it is when you make a gunky mistake, like I did! I used the regular emboss resist technique, then ran my piece of cardstock through the Big Shot to cut the beautiful border from the Card Front Builder thinlit dies. To my dismay, I discovered that my dirty embossing plates left a bunch of dark specs of old paper dust and bits embedded into my embossed image!!  EW! Heating and wiping the embossing finish away allowed me to clean up my mess without having to start over again!

I absolutely love how it looks!

The rest of the card came fairly quickly. I used my markers to ink up the rubber on my holly stamp from the Carols of Christmas stamp set so that I could have Lemon Lime Twist leaves with a spackling of Elegant Eggplant around the edges, but still have Real Red berries. After doing the old huffing-with-your-breath-on-the-stamp-to-remoisten-the-ink technique, I stamped the holly image and die cut it with the co-ordinating die from the Card Front Builder Thinlits. This was attached with half of a Mini Dimensional to my card front.

The beautiful little ornament image was also coloured with markers. I used Real Red and Elegant Eggplant to only colour two of the three ornaments, then used Basic Gray for the string of the ornament. I used a sticky note to mask the bottom of the sentiment as my stamp was too tall for where I wanted it, then I huffed once again and stamped the image. I also used a Blender Pen to blend some of the ink in the each ornament on my paper, then added a small bead glue with the Fine Tip Glue Pen to the center of each ornament to I could apply Dazzling Diamonds Glitter. The Linen Thread, tied into a tiny little bow was attached with a carefully rolled Glue Dot.

I wanted a little something-something behind my card front, so I adhered a piece of Dazzling Diamonds Glimmer paper to my card base before attaching my completed card front to it with Stampin’ Up! Dimensionals. Tip: Because of the nature of glitter, even on Glimmer Paper, I was liberal with the Dimensionals and used generous pressure to ensure good contact the the Glimmer paper. If this isn’t done, you might find that your card front detaches without your permission!

If you’re in my area, this card will be offered at my technique class. Contact me if you’d like to join us!

Be sure to give this colour combination a try and load it up on the As You See It Challenge page so we can see your beautiful creations.

 

Sending Smiles Shadow Box Card

Yay! The As You See It Challenge Blog is up and running again! After tremendous technical issues, it has emerged anew, like the phoenix from the ashes! LOL! It sure feels like that after all that the folks working on it have been through. Thanks to all their hard work, we have had to start with a whole new web page using a whole new platform. Sadly, none of our previous material could be retrieved.

So the card today is one of many As You See It Challenge designs that I will be sharing here on my Inking on the Fly blog. You will see a new design every two weeks that will hopefully inspire you to play along with the As You See It Challenge Blog! It’s fun! It’s creative! And it will get your mojo flowing for a stepping-off point toward more of your own creative genius! I know it’s true because I have experienced it first hand, folks!!

Here’s the sketch challenge on which I have based my design:

AYSI#141And here is my card featuring the Lift Me Up Stamp Set and the Up and Away Thinlit dies from Stampin’ Up! I also used the Outdoor Adventure Framelits dies as they work in quite nicely. Actually, there are a LOT of stinkin’ dies used for my card this week! Yikes!! You can see the Stitched Shapes Framelits are in the mix as well, which will be available for purchase on the 16th!

Sending Smiles Shadow Box Card by Amy Jasper www.inkingonthefly.comThe inside if the card it the fun part. More dies, of course.

Sending Smiles Shadow Box card inside - by Amy Jasper www.inkingonthefly.comThe base of this card is super easy to make and finishes to a 4″ x 5.5″ card. I started with a 12″ x 5.5″ piece of Kraft cardstock. Once you have your piece of cardstock cut for the base of the card, you can score it to prepare for your fancy folding. I love using my Simply Scored tool and scoring stylus for projects like this – it gives me quick measuring and deep impressions that are easy to see and fold so nicely. I scored the paper at 4″, 7.5″, 8″, and 11.5″. Once you’ve precut your “window” on the inside of the card (this is going to be the section between the 8″ and the 11.5″ score marks), you can fold along your score lines, using your Bone Folder to make the folds nice and crisp.

You can’t really see it well in the photos, but the folds all fold in the same direction until the 11.5″ score line meets the inside of the card front, where you adhere it in place. Oh dear, maybe I’ll have to add pictures later … Let me know how it goes.

The rest of the design is simply layering, stamping, and die cutting (LOTS of die cutting!).

Now that you’ve seen my design inspired by the As You See It Challenge sketch, why not try the sketch yourself. Head on over to the As You See It Challenge Blog and see what the other designers have come up with and get creating!! But before you do anything else, be sure to leave me a note to say that you stopped by!

Sending Smiles Shadow Box Card by Amy Jasper www.inkingonthefly.comSupplies used are all from Stampin’ Up.

  • Paper: Kraft Designer Paper, Crushed Curry Cardstock, Crumb Cake cardstock, Serene Scenery Designer Series Paper Stack, Island Indigo Cardstock, Whisper White Cardstock, Rich Razzleberry Cardstock, Cucumber Crush Cardstock, Garden Green Cardstock, Soft Suede Cardstock, Soft Sky Cardstock.
  • Stamps: Lift Me up stamp set, Sealed with Love Stamp set.
  • Inks: Crumb Cake, Island Indigo, Rich Razzleberry, Jet Black Stazon
  • Embellishments: Basic Rhinestones
  • Tools: Big Shot, Precision Plate, Up and Away Thinlits Dies, Stitched Framelit Dies, Outdoor Adventure Framelit Dies, Simply Scored, Bone Folder.
  • Adhesives: Stampin’ Dimensionals, Tombo Multipurpose Liquid Glue, Fine Tip Glue Pen

 

Save